Install Kubeflow

This guide describes how to use the kfctl binary to deploy Kubeflow on IBM Cloud.

Prerequisites

Installing the IBM Cloud developer tools

If you already have ibmcloud installed with the ibmcloud cs plugin, you can skip these steps.

1. Download and install the ibmcloud command line tool: https://console.bluemix.net/docs/cli/index.html#overview

2. Install the cs (container-service) plugin:

   ibmcloud plugin install container-service -r Bluemix
   

3. Authorize ibmcloud:

   ibmcloud login
   

Setting environment variables

To simplify the command lines for this walkthrough, you need to define a few environment variables.

1. Set CLUSTER_NAME, CLUSTER_REGION, and CLUSTER_ZONE variables:

   export CLUSTER_NAME=Kubeflow
   export CLUSTER_REGION=us-south
   export CLUSTER_ZONE=dal13
   

   • CLUSTER_NAME must be lowercase and unique among any other Kubernetes clusters in this IBM Cloud region.
   • CLUSTER_REGION can be any region where IKS is available. You can get a list of all available regions via the IBM Cloud documentation or via ibmcloud cs regions.
   • CLUSTER_ZONE can be any zone that is available in the specified region above. You can get a list of all available locations from the IBM Cloud documentation or by using ibmcloud cs zones after you set the region by using ibmcloud cs region-set $CLUSTER_REGION.

Creating a IBM Cloud Kubernetes cluster

To make sure the cluster is large enough to host all the Knative and Istio components, the recommended configuration for a cluster is:

• Kubernetes version 1.15 or later
• 4 vCPU nodes with 16GB memory (b2c.4x16)

1. Set ibmcloud to the appropriate region:

   ibmcloud cs region-set $CLUSTER_REGION
   

2. Create a Kubernetes cluster on IKS with the required specifications:

   ibmcloud cs cluster-create --name=$CLUSTER_NAME \
     --zone=$CLUSTER_ZONE \
     --machine-type=b2c.4x16 \
     --workers=3
   

   If you’re starting in a fresh account with no public and private VLANs, they are created automatically for you. If you already have VLANs configured in your account, get them via ibmcloud cs vlans --zone $CLUSTER_ZONE and include the public/private VLAN in the cluster-create command:

   ibmcloud cs cluster-create --name=$CLUSTER_NAME \
     --zone=$CLUSTER_ZONE \
     --machine-type=b2c.4x16 \
     --workers=3 \
     --private-vlan $PRIVATE_VLAN_ID \
     --public-vlan $PUBLIC_VLAN_ID
   

3. Wait until your Kubernetes cluster is deployed:

   ibmcloud cs clusters | grep $CLUSTER_NAME
   

   It can take a while for your cluster to be deployed. Repeat the above command until the state of your cluster is “normal”.

4. Point kubectl to the cluster:

   ibmcloud cs cluster config $CLUSTER_NAME
   

   Follow the instructions on the screen to EXPORT the correct KUBECONFIG value to point to the created cluster.

5. Make sure all nodes are up:

   kubectl get nodes
   

   Make sure all the nodes are in Ready state. You are now ready to install Istio into your cluster.

Understanding the Kubeflow deployment process

The deployment process is controlled by the following commands:

• build - (Optional) Creates configuration files defining the various resources in your deployment. You only need to run kfctl build if you want to edit the resources before running kfctl apply.
• apply - Creates or updates the resources.
• delete - Deletes the resources.

App layout

Your Kubeflow application directory ${KF_DIR} contains the following files and directories:

• ${CONFIG_FILE} is a YAML file that defines configurations related to your Kubeflow deployment.

  • This file is a copy of the GitHub-based configuration YAML file that you used when deploying Kubeflow. For example, https://raw.githubusercontent.com/kubeflow/manifests/v1.0-branch/kfdef/kfctl_k8s_istio.v1.0.0.yaml.
  • When you run kfctl apply or kfctl build, kfctl creates a local version of the configuration file, ${CONFIG_FILE}, which you can further customize if necessary.

• kustomize is a directory that contains the kustomize packages for Kubeflow applications.

  • The directory is created when you run kfctl build or kfctl apply.
  • You can customize the Kubernetes resources (modify the manifests and run kfctl apply again).

Kubeflow installation

Run the following commands to set up and deploy Kubeflow.

1. Download the kfctl v1.0 release from the Kubeflow releases page.

2. Unpack the tar ball

   tar -xvf kfctl_v1.0_<platform>.tar.gz
   

3. Run the following commands to set up and deploy Kubeflow. The code below includes an optional command to add the binary kfctl to your path. If you don’t add the binary to your path, you must use the full path to the kfctl binary each time you run it.

   # The following command is optional, to make kfctl binary easier to use.
   export PATH=$PATH:<path to where kfctl was unpacked>
   
   # Set KF_NAME to the name of your Kubeflow deployment. This also becomes the
   # name of the directory containing your configuration.
   # For example, your deployment name can be 'my-kubeflow' or 'kf-test'.
   export KF_NAME=<your choice of name for the Kubeflow deployment>
   
   # Set the path to the base directory where you want to store one or more 
   # Kubeflow deployments. For example, /opt/.
   # Then set the Kubeflow application directory for this deployment.
   export BASE_DIR=<path to a base directory>
   export KF_DIR=${BASE_DIR}/${KF_NAME}
   
   # Set the configuration file to use, such as the file specified below:
   export CONFIG_URI="https://raw.githubusercontent.com/kubeflow/manifests/master/kfdef/kfctl_ibm.yaml"
   
   # Generate and deploy Kubeflow:
   mkdir -p ${KF_DIR}
   cd ${KF_DIR}
   kfctl apply -V -f ${CONFIG_URI}
   

   • ${KF_NAME} - The name of your Kubeflow deployment. If you want a custom deployment name, specify that name here. For example, my-kubeflow or kf-test. The value of KF_NAME must consist of lower case alphanumeric characters or ‘-', and must start and end with an alphanumeric character. The value of this variable cannot be greater than 25 characters. It must contain just a name, not a directory path. This value also becomes the name of the directory where your Kubeflow configurations are stored, that is, the Kubeflow application directory.

   • ${KF_DIR} - The full path to your Kubeflow application directory.

4. Check the resources deployed correctly in namespace kubeflow

   kubectl get all -n kubeflow
   

5. Open Kubeflow Dashboard. The default installation does not create an external endpoint but you can use port-forwarding to visit your cluster. Run the following command and visit http://localhost:8080.

   kubectl port-forward svc/istio-ingressgateway -n istio-system 8080:80
   

In case you want to expose the Kubeflow Dashboard over an external IP, you can change the type of the ingress gateway. To do that, you can edit the service:

 kubectl edit -n istio-system svc/istio-ingressgateway

From that file, replace type: NodePort with type: LoadBalancer and save.

While the change is being applied, you can watch the service until below command prints a value under the EXTERNAL-IP column:

 kubectl get -w -n istio-system svc/istio-ingressgateway

The external IP should be accessible by visiting http://. Note that above installation instructions do not create any protection for the external endpoint so it will be accessible to anyone without any authentication.

Additional information

You can find general information about Kubeflow configuration in the guide to configuring Kubeflow with kfctl and kustomize.

Feedback

Was this page helpful?

Yes No

Glad to hear it! Please tell us how we can improve.

Sorry to hear that. Please tell us how we can improve.